|Need a Light?
It was time to put my attention on the engine
lights. The first thing I did was to machine out the cavities in the
smokebox cover. The Daylight had a Mars light for the upper light and a
fixed light for the lower light. I then machined out the recess for the
number boards. LED's were also installed in this area. LED's were used
for all the lights on the engine. The picture below shows the number
board lit up (It's hard to tell in sunlight). As you can see she is
numbered 4454. Still need to do a bit more wiring before the nose is
remounted to the smokebox.
And here it is installed and lit
More to do... Back to work!