Home What's New Building the Daylight Daylight Tender Observation Car Engine Stand Gondolas Gauge Bell Ringer Air Compressor Gas Switcher

#18 Bell

Back Next

Ring my Charms (I mean bell)...

Had an itch to work on the lathe so I decided to make a bell.  Didn't want to make a scale one because sound does not scale well.  Started out with a 4" cylinder of bronze.  Then it was rough machined, filed, sanded and sanded and sanded...  (similar to making the side rods).  Well, it looks and sounds excellent. 

It will be nickel plated later along with the rods.

 

Here are the dimensions.

Back Next

#01 So It Began #2 Frame #3 Drivers #4 Quartering #5 Trucks #6 Frame & Wheels #7 Side Rods #8 Cylinder Boring #9 Cyl/Valve Liners #10 Cyl/Valve Cover #11 Pistons & Valves #12 Cyl Assembled #13 Boiler #14 Suspension #15 Crosshead #16 Brakes #17 Link Support #18 Bell #19 Crosshead (again) #20 Connecting Rod #21 Stationary Runner #22 Smokebox #23 Valve Gear #24 Running on Air #25 Piston Rings #26 Axle Pump #27 Plating #28 Lubrication #29 Blast Nozzle #30 Stack #31 Steam Turret #32 Burner Manifold #33 Mounting Brackets #34 Boiler Insulation #35 Jacketing #36 Cab #37 Throttle #38 Reverse Lever #39 Track Test #40 Smokebox Access #41 Electric Blower #42 Turbulators #43 Burner Test #44 Piping #45 Cab (part 2) #46 Inaugural Run #47 Post Steamup #48 Smokebox Lights #49 Running Boards #50 Pilot #51 Skirting #52 Paint #53 Lettering #54 Whistle #55 Skyline Casing #56 Fuel System Mods #57 Odds and Ends #58 Turbos

Home | What's New | Building the Daylight | Daylight Tender | Observation Car | Engine Stand | Gondolas | Gauge | Bell Ringer | Air Compressor | Gas Switcher

 

 

Questions or problems regarding this web site should be directed to [heydan "at" danslocoworks "dot" com].
Copyright 2016, 2017 [Dan's Loco Works]. All rights reserved.
Last modified: 09/02/2017.