Home What's New Building the Daylight Daylight Tender Observation Car Engine Stand Gondolas Gauge Bell Ringer Air Pump Gas Switcher

Brass Gauge

I wanted something more than a black steel casing for the pressure gauge, so I bought a couple pressure gauges, took them apart, measured them up, made some drawings then started cutting on the lathe.  Here is the gauge disassembled.

Here it is completed

Just in time for the first steam up test of the boiler.



Home | What's New | Building the Daylight | Daylight Tender | Observation Car | Engine Stand | Gondolas | Gauge | Bell Ringer | Air Pump | Gas Switcher



Questions or problems regarding this web site should be directed to [heydan "at" danslocoworks "dot" com].
Copyright 2017, 2018 [Dan's Loco Works]. All rights reserved.
Last modified: 02/02/2018.